The Shop's saws
We have two Saw Stop Saws running in the shop.
Both are the Industrial saws, one is 5 horse power 3 phase machine with the 52 inch rail and fence set up.
We also installed a custom extra large outfeed table.
The other saw is most set for Dado cutting, and is a industrial, 3 horse power 230volt, 1phase machine.
Shop's Router Tables
We have two fixed bench top router tables and two portable tables.
The two fixed and the Large Kreg table take the standard Porter Cable routers.
And the Festool CMS router table has the 1400 router in it.
We mounted the Festool CMS on a mobile cart so we could move it around easier. We also built in the dust collection in the cart and added draws for the accessories and router bit box.
The fixed router table also have dust collection that works.
If you have dust problems at home, stop in and see what we have done.
The Shop'sTurning Lathes
We have five nova lathes for wood turning in the shop.
Two Nova belt drive - manual speed adjusting, two Nova DVR electronic variable speed control, one Nova with dc controller for variable speed. One lathe has extended lathe bed for extra long turning. There is a 36 inch Vega Pro duplicator. A lathe cart with sharpening station and the basic chucks and tools for use.
The Shop's Jointer and Planer
We have a Delta 8 inch jointer and a 15 inch Powermatic planer.
The Powermatic planer is a Helix Head cutter for smoother and cleaner surfacing.
The Shop's Cross Cut Area
Twenty Four Feet of room for cross cutting when needed!
There is a 12 inch Delta Radial-Arm Saw for rough cutting.
And there is a Festool Kapex for exact miter and cross cuts.
Eight feet of room between machines and eight feet to either side.
The Shop's Wood Boring Machines
We have two drill press, both variable speed.
One Delta 12 inch swing bench-top drill press. One Jet 17 inch swing floor standing drill press.
We also have a Jet bench-top mortising machine.
And there is a Blum boring machine for Blum euro hinges. All set to drill all three holes at once for euro hinges.
Buy your euro hinges from us and we will drill your doors for FREE.
The Shop's Band Saws
We have Three Band Saws in the shop.
Two 14 inch Delta band saws, and one 18" Jet band saw.
the ABCs of CNC with Phil LaFleur
Sunday, November 3; 10 am - 2 pm
or Sunday, January 12, 2020; 10 am - 2 pm
or Sunday, March 15, 2020; 10 am - 2 pm
or Sunday, May 3, 2020; 10 am - 2 pm
Router Basics Class
Saturday, March 14, 2020; 12:30 pm - 5 pm
or Saturday, May 23, 2020; 12:30 pm - 5 pm
Bowl Turning Class
Wednesdays, October 23, 30, November 6 ,& 13; 6:30 pm - 9 pm
or Saturday & Sunday, December 7 & 8; 10 am - 5 pm
or Wednesdays, January 8, 15, 22 & 29, 2020; 6:30 pm - 9 pm
or Saturday & Sunday, February 8 & 9, 2020; 10 am - 5 pm
or Wednesdays, March 4, 11, 18 & 25, 2020; 6:30 pm - 9 pm
or Wednesdays, April 8, 15, 22 & 29, 2020; 6:30 pm - 9 pm
or Saturday & Sunday, May 16 & 17, 2020; 10 am - 5 pm