WATERLOX PRODUCTS
Waterlox Original Sealer & Finish TB 5284 Original Formula
Applies easily with a lambswool applicator (floors), China bristle brush, roller, cloth or spray. Sanding is not necessary between coats for adhesion purposes. Non-Toxic when dry. Coverage: approx. 500 square feet per gallon per coat. Use on interior wood surfaces including floors, windows, doors, cabinetry, woodwork, tables, furniture, bar tops, picture frames, fly fishing rods, gun stocks, and various woodworking projects. Also excellent for use as a sealer, primer, tie-coat or paint additive to improve adhesion. Exceptional adhesion to oily, dense, exotic woods like teak, rosewood, and Ipe. Use on porous interior surfaces such as slate, brick, stone, tile, linoleum or cement to seal and prevent chalking and dusting*. For exterior projects as a sealer only, use 2 coats to prime, followed by 1 or 2 coats of Marine Finish.
*As with all projects, apply to a small test area to be sure that the final result is as expected. For slate, brick, stone and concrete, you may need only one coat to penetrate and seal.
Original Sealer/Finish Product Bulletin Original Sealer/Finish (TB 5284) MSDS Sheet Product Specification Sheet Technical Discussion on Coatings VOC Compliant Original Sealer/Finish (TB6038) MSDS Sheet Woodworking Guide Wood Floor Finishing Guide Find out more about VOC regulations
For Complete instructions see our Waterlox Floor Finishing Guide